BC Series
The BC Series provide endless design possibilities by lining up non-dimensional materials perfectly and adding couplers extends the height up to 44 inches. With the bottom slope correctors, pitch can be made up to 5% and adding the top slope corrector increased up to 10%.
1) Head Head of the support is screwed directly onto the base or the coupler. The head, with a diameter of 150 mm, with the options of tabs of different thickness from 2, 4.5, 6, 8, to 10 mm making an open joint between stone tiles. On the head of the coupler, a safety notch at the base of the threaded part indicates the limit of adjustment in height and prevents over extension. On the head of support, 12 holes of 8 mm in diameter for attaching options.
2) Coupler is used when the height of the pedestal exceeds 200mm. Two wire hooks on the sides allow for the pedestals to be tied to each other, guaranteeing greater stability when the height exceeds 600 mm.
3 Base The base is 5mm thick polypropylene, 205mm in diameter and can be simply placed or fixed on a solid substrate. It also has holes at the bottom for drainage
4 Slope Corrector The BC-PH5 can compensate, a horizontal, a slope from 0 to 5% (slope from 0 to 5 cm per meter). This is placed under the base of the pedestal.
BC Series Accessories
Product Specifications
View or Download PDFs
Applications
Adjusting the Slope CorrectorDPH Series Brochure
DPH Series Technical Specifications
DPH Series Compression Test
DPH Series Wood Joist Holder
DPH Series Heights of Pedestals
DPH Series Technical Data SheetBC Series Brochure
BC Series Technical Specifications
BC Series Compression Test
BC Series Wood Joist Holder
BC Series Heights of Pedestals
BC 6 Technical Data SheetPB Series Brochure
PB 3 Technical Data Sheets
PB 6 Technical Data Sheets